How to Make a Drawstring Purse Using Grommets
Browse Articles Videos By CategoryFood DrinkHobbies, Games ToysPlace two pocket rectangles with the right sides facing, and pin them. Use the sewing machine to sew around all four sides using a 1/2 inch seam allowance and leavin pandora bracelets g a 3 inch opening on one long edge for turning. Turn the pocket right side out and press with the iron. Hand sew the opening closed. Lay one lining rectangle on your work surface with the right side up and the short sides running horizontally. Measure down 3 inches from the top edge and center the sewn pocket rectangle with the short edg pandora bracelets es running horizontal. Pin the two long sides and the bottom of the pocket rectangle to the lining. Topstitch 1/4 inch from the three pinned edges to create the pocket. Repeat with the other pocket rectangles and the remaining lining piece.Place the two pu pandora bracelets rse fabric rectangles together with the right sides facing each other. Pin the two long edges and one short edge for the purse bottom. Sew the pinned edges using a 1/2 inch seam allowance. Place the two lining pieces together with the right sides facing and the pockets running the same direction. The opening of the pockets are just below the top edge of the purse. Pin the s pandora bracelets ide edges and the bottom of the lining. Sew the pinned edges using a 1/2 inch seam allowance and leaving a 3 inch opening in the bottom seam for turning.